WRAP INTERIOR – TERMS & CONDITIONS
ARCHITECTURAL VINYL WRAPPING – TERMS & CONDITIONS
- 1. Acceptance of Quote
- 1.1. The quotation (“Quote”) becomes a legally binding agreement once the Client:
- (a) signs the Quote,
- (b) provides written approval, or
- (c) pays any deposit.
- 1.2. Acceptance of the Quote confirms the Client’s agreement to the full Scope of Work, pricing, payment terms, and these Terms & Conditions.
- 1.1. The quotation (“Quote”) becomes a legally binding agreement once the Client:
- 2. Scope of Work
- 2.1. The Scope of Work (“Scope”) includes only the items listed in the Quote.
- 2.2. Any additional work, modifications, or changes requested by the Client constitute a variation and must be approved and priced by Wrap Interior’s back-office team before execution.
- 2.3. Site applicators are not authorized to accept or commit to scope changes.
- 2.4. Additional Scope requires a new estimate and written Client approval before work proceeds.
- 2.5. Any leftover materials remain the property of Wrap Interior and will be returned to inventory.
- 3. Material Selection & Changes
- 3.1. Color, texture, and finish selections must be checked and approved by the Client.
- 3.2. Changes to material selection must be made at least 48 hours in advance, subject to availability.
- 3.3. Selection of unavailable material requires 6–8 days lead time and may affect the cost.
- 3.4. Consultants may advise on materials but are not responsible for the Client’s final selection.
- 3.5. Changing materials after work has been scheduled or commenced will be charged in full and may delay delivery.
- 3.6. Material selection is the sole responsibility of the client, our staff and interior designers will help and guide if needed.
- 3.7. Some material codes may carry a price premium which will be reflected in the quote once the selection has been made.
- 4. Custom Orders
- 4.1. Custom-order materials cannot be changed or canceled once the order is placed, unless notification is received 7 days in advance.
- 4.2. Failure to notify within this timeframe will result in the Client being charged 100% of the material cost.
- 5. Materials Delivered to Site
- 5.1. Excess material delivered to the site is safety stock to prevent work stoppages.
- 5.2. Such materials do not imply transfer of ownership and may be collected or returned to inventory at any time.
- 6. Surface Conditions & Preparation
- 6.1. Wrapping on uneven, damaged, or deteriorated surfaces will impact final finishing and is not the responsibility of Wrap Interior.
- 6.2. Application on uneven surfaces may require flattening solutions using Forex/Micron/PVC boards, which will be charged additionally.
- 6.3. Silicone work performed by Wrap Interior is not covered under warranty.
- 6.4. If deep cleaning is required, the Client is responsible for completing it before installation; otherwise quality finishing & warranty may be impacted.
- 7. Reversibility
- 7.1. The reversibility of wrapping is highly dependent on underlying surfaces.
- 7.2. Clients must request confirmation of reversibility prior to the wrapping being done.
- 7.3. Wrap Interior will assess and advise, but does not guarantee reversibility unless explicitly stated.
- 7.4. Reversibility does not include deep cleaning of the surfaces which will be required after the work is done.
- 8. Site Access, Permits & Safety
- 8.1. The Client is responsible for all permits, permissions, and access arrangements.
- 8.2. Failure to provide access on the scheduled day will incur a AED 2,000 charge and result in work being rescheduled to the next available date.
- 8.3. If the site is not ready upon the team’s arrival, this will be treated as a rescheduling, with applicable fees as stated in clause 8.2.
- 8.4. All valuable or fragile items must be removed from site. Wrap Interior is not liable for loss or damage to items left on site.
- 9. Scheduling, Postponements & Cancellations
- 9.1. Jobs may be postponed by the Client with 48 hours’ notice at no cost.
- 9.2. Postponements with less than 48 hours’ notice will incur a AED 2,000 penalty.
- 9.3. If rescheduling is requested 7 days or less before installation, a 25% penalty of total project value applies.
- 9.4. Wrap Interior reserves the right to reschedule if site readiness, access, or conditions prevent start of work.
- 9.5. Deposits are non-refundable for all cancellations.
- 10. Payment Terms
- 10.1. Projects under AED 5,000 require 100% payment before work commences or materials ordered.
- 10.2. Projects above AED 5,000 require 80% payment before work commences or materials ordered.
- 10.3. If otherwise referenced in the Quote, a minimum of 70% deposit is mandatory before any work begins.
- 10.4. Deposits are non-refundable should the job be cancelled.
- 10.5. Balance payment is due immediately upon completion and prior to handover.
- 10.6. Delayed balance payments may result in voided warranty and interest charges.
- 10.7. Wrap Interior reserves the right to stop or cancel work if payments are not received as agreed.
- 11. Workmanship, Finishing & Warranty
- 11.1. Wrap Interior applies workmanship and finishing consistent with the company’s standards and training protocols.
- 11.2. Requests for finishing outside these standards may be refused. If approved, doing so voids all warranty.
- 11.3. Warranty does not cover:
- Surfaces affected by moisture, heat, structural issues
- Damage caused by client misuse
- Silicone works
- Installations on deteriorated surfaces
- Delays caused by site issues
- Wear and tear as well as misuse and accidental damages are not covered under warranty
- 11.4. Warranty covers and is limited to material discoloration, vinyl peeling and bubble formation for a period of 5 years.
- 11.5. Warranty claims must be submitted in writing with supporting picture evidence and will be compared to our evidence from work completion reports for verification.
- 11.6. Use only approved cleaning products; harsh chemicals and bleach might damage the vinyl and will void warranty.
- 12. Liability
- 12.1. Wrap Interior is not liable for:
- (a) indirect or consequential losses,
- (b) delays caused by suppliers, site conditions, or third parties, or damaged caused by other parties or workers,
- (c) the condition of the site’s underlying surfaces.
- 12.2. Total liability is limited to the value of the Quote.
- 12.1. Wrap Interior is not liable for:
- 13. Right to Terminate
- 13.1. Wrap Interior reserves the right to cancel, stop, or refuse any job at any point in time if the Client:
- fails to meet payment terms,
- fails to provide required access,
- violates any of these Terms & Conditions,
- creates unsafe or unsuitable working conditions.
- No compensation is owed to the Client in such cases, and deposits remain non-refundable.
- 13.1. Wrap Interior reserves the right to cancel, stop, or refuse any job at any point in time if the Client:
- 14. Governing Law
- These Terms & Conditions are governed by the laws of the United Arab Emirates. Any disputes shall be resolved through negotiation and, if necessary, arbitration in the competent UAE jurisdiction.
SPC & LVT PARQUET FLOORING – TERMS & CONDITIONS
The following additional Terms & Conditions apply specifically to SPC (Stone Plastic Composite) and LVT (Luxury Vinyl Tile) parquet flooring installations.
- 1. Material Selection & Availability
- 1.1. Selection of SPC/LVT colors, textures, and patterns must be approved by the Client in writing.
- 1.2. Once the deposit is paid, material availability is subject to supplier stock; if the selected material is unavailable, Wrap Interior will propose the closest available alternative.
- 1.3. Any upgrades or changes requested by the Client due to stock unavailability will be billed accordingly.
- 1.4. SPC/LVT orders may carry supplier lead times of 4–10 days, depending on availability.
- 2. Subfloor Conditions & Preparation
- 2.1. SPC and LVT require flat, level, and clean subfloors. Any unevenness, cracks, dips, or high points will affect installation and final appearance.
- 2.2. Wrap Interior will conduct a visual inspection only. A full technical subfloor assessment must be requested if required.
- 2.3. If leveling or subfloor correction is needed, it will be charged separately.
- 2.4. Wrap Interior is not responsible for:
- Popping, hollow sounds, or movement caused by uneven subfloors
- Moisture damage from the original flooring
- Issues caused by structural cracks or substrate failure
- 3. Moisture & Environmental Conditions
- 3.1. SPC/LVT must be installed in dry, climate-controlled environments.
- 3.2. Any moisture, leaks, plumbing issues, AC condensation, or dampness under or around the subfloor will void the warranty.
- 3.3. The Client is responsible for ensuring all moisture-related issues are resolved before installation.
- 4. Expansion Gaps & Finishing
- 4.1. SPC and LVT require expansion gaps around walls, doors, cabinets, and fixed structures.
- 4.2. Failure to maintain these gaps may cause lifting or buckling, which is not covered by warranty.
- 4.3. Skirting boards, transitions, reducers, and finishing trims may be required and will be charged separately unless stated in the Quote.
- 5. Installation Conditions
- 5.1. The site must be clean, empty, and ready upon the team’s arrival.
- 5.2. All furniture, appliances, and obstructions must be removed by the Client prior to installation. In the case where furniture and appliances are already on site, there will be a surcharge to move these around.
- 5.3. If the site is not ready, the visit will be considered a rescheduling, and applicable charges will apply.
- 5.4. SPC/LVT material must acclimatize on-site for 24–48 hours before installation.
- 6. Warranty – 10 Years
- Wrap Interior provides a 10-year warranty for SPC and LVT flooring covering the following:
- 6.1. Covered Under Warranty
- Locking mechanism breaking under normal residential use
- Popping, separation, or lifting caused by manufacturing defects
- Discoloration or fading due to manufacturing issues (excluding sunlight UV damage)
- Factory defects in material integrity
- 6.2. Not Covered Under Warranty
- Damage due to moisture, leaks, spills, flooding, AC condensation, or humidity
- Subfloor movement or failure
- Damage caused by impact, dragging furniture, or improper cleaning chemicals
- Heavy loads exceeding product limitations
- Color changes caused by direct sunlight or UV exposure
- Damage caused by failure to maintain proper expansion gaps
- Scratches, dents, or wear from misuse
- Issues arising from cleaning, construction, or maintenance works performed by others
- Normal wear and tear over time
- 6.3. Wrap Interior will repair or replace only the affected boards under warranty.
- 6.4. Labor for reinstallation may be chargeable depending on the issue.
- 7. Post-Installation Client Responsibilities
- 7.1. Protective pads must be placed under furniture legs.
- 7.2. Rolling chairs must have soft rubber wheels or protective mats.
- 7.3. Use only approved cleaning products; harsh chemicals and bleach will void warranty.
- 7.4. Large area rugs must have non-staining backings.
- 7.5. The Client must avoid excessive water cleaning or steam mops.
- 8. Delivery, Storage & Handling
- 8.1. Materials stored on-site become the responsibility of the Client.
- 8.2. Any damage after delivery, including water damage, heat exposure, or mishandling, is not covered.
- 8.3. Wrap Interior is not responsible for delays caused by suppliers, customs, or stock shortages.
- 9. Variations & Changes
- 9.1. Any change in layout pattern (herringbone, chevron, diagonal, etc.) must be approved in advance and may affect cost.
- 9.2. Changes after installation begins will be charged in full.
- 9.3. Leftover SPC/LVT material remains property of Wrap Interior unless purchased separately.
- 10. Liability
- 10.1. Wrap Interior is not liable for indirect, incidental, or consequential damages.
- 10.2. Total liability is limited to the value of the flooring quote.
- 11. Right to Refuse or Cancel
- Wrap Interior reserves the right to refuse or cancel an SPC/LVT job if:
- The subfloor is unsuitable
- Moisture issues are detected
- Environmental conditions are not within standards
- Client fails to meet payment, access, or preparation requirements
- Deposits remain non-refundable in such cases.
- Wrap Interior reserves the right to refuse or cancel an SPC/LVT job if: